These 1" diameter anvils (1/8" wide body with 0.190" diameter through hole in the center) fit Dukane standard slitters and mini-slitters, as well as many competitive products. Sharp edge and tight radius anvils typically are used for slitting, while broader radius anvils can either slit or seal. Styles: UFF1001 -- 0.065" Radius UFF1002 -- Sharp with 150 degree included angle UFF1003 -- Sharp with 155 degree included angle UFF1004 -- Sharp with 160 degree included angle UFF1005 -- 0.094" Radius UFF1006 -- 0.062" Radius (180 degrees, dropped shoulder) UFF1007 -- 0.031" Radius (180 degrees, dropped shoulder) UFF1008 -- 0.020" flat with 30 degree incldued angle on shoulders UFF1009 -- 0.020" radius with 90 degree included angle on shoulders UFF1010 -- Sharp with 110 degree included angle UFF1011 -- Sharp with 120 degree included angle UFF1012 -- Sharp with 130 degree included angle UFF1013 -- Sharp with 140 degree included angle UFF1014 -- 0.010" Radius with 45 degree included angle on shoulders UFF1015 -- 0.010" Radius with 90 degree included angle on shoulders UFF1016 -- 0.010" Radius with 110 degree included angle on shoulders UFF1017 -- Sharp with 90 degree included angle All anvils above are made of tool steel hardened to 56-58RC. Each anvil is stamped with part number so when it needs replacement you will know what to re-order. |
Feedback | Store Home | Main Web Site Home | About Dukane | Contact Us | Search | Top
Now accepting on line orders from: |
